PVI-MOD1 - Broadcast RF Modulator Exciter Card for VeCOAX BT Chassis
$2,645.00
Available for Order
3-5 Business Days
SKU
PVI-PVI-MOD1
PVI-MOD1 - Broadcast RF Modulator Exciter Card for On-Air Broadcasting and Cable Transmission Distribution for VeCOAX BT Chassis
Highlights
Expansion interface to add 1 to 16 RF Frequency carriers output to VeCOAX BT Broadcast Transmission Rack
Non-Agile Broadcast RF Carriers are mixed to the same output and can be turned on/off as needed
Full Broadcast Quality MER & RF output to drive directly any Cable Distribution or Exciter-to-amplifier-to-tower
16 Re-Multiplexers ( one per rf carrier ) with PSI/PSIP generation / restamping / injection
Available for any TV standard including US QAM Cable, US ATSC Off Air, DVB-T, DVB-C, ISDBT, ISDBT-1SEG, DMB-T
Technical specifications
Data input: Max 512 IP input over UDP/RTP, 2 GE Ports (RJ45/SFP) 128 IP input through front panel GE2 port or internal IP output
Data output: 16 or 32 IP output over UDP/RTP/RTSP, unicast/multicast, 2 GE Ports (RJ45/SFP)
Trans Rate: Max 840Mbps/GE Port
RF output (F type): 16 channels of multiplexing, scrambling and modualtion.
Multiplexing: Maximum PID Remapping: 180 output pids per channel
Function: PID remapping (automatically or manually), Accurate PCR adjusting, generate PSI/SI table automatically
Scrambling: Maximum simulcrypt CA: 4
Standard: ETR289, ETSI 101 197, ETSI 103 197
Connection: Local/remote connection
Modulation: Standard: EN300 429/ITU-T J.83A/B (DVB-C)
MER: ≥40dB
RF frequency: 50~960MHz, 1KHz step
RF output level: -20~+10dBm (87~117 dBµV), 0.1dB step for all carriers
Symbol Rate: 5.0Msps~7.0Msps, 1ksps step
Constellation: 16/32/64/128/256QAM
Output: 16 non-adjacent carrier outputs within 192M bandwidth
PVI-MOD1 - Broadcast RF Modulator Exciter Card for On-Air Broadcasting and Cable Transmission Distribution for VeCOAX BT Chassis
Highlights
- Expansion interface to add 1 to 16 RF Frequency carriers output to VeCOAX BT Broadcast Transmission Rack
- Non-Agile Broadcast RF Carriers are mixed to the same output and can be turned on/off as needed
- Full Broadcast Quality MER & RF output to drive directly any Cable Distribution or Exciter-to-amplifier-to-tower
- 16 Re-Multiplexers ( one per rf carrier ) with PSI/PSIP generation / restamping / injection
- Available for any TV standard including US QAM Cable, US ATSC Off Air, DVB-T, DVB-C, ISDBT, ISDBT-1SEG, DMB-T
Technical specifications
- Data input: Max 512 IP input over UDP/RTP, 2 GE Ports (RJ45/SFP)
128 IP input through front panel GE2 port or internal IP output
- Data output: 16 or 32 IP output over UDP/RTP/RTSP, unicast/multicast, 2 GE Ports (RJ45/SFP)
- Trans Rate: Max 840Mbps/GE Port
- RF output (F type): 16 channels of multiplexing, scrambling and modualtion.
- Multiplexing: Maximum PID Remapping: 180 output pids per channel
- Function: PID remapping (automatically or manually), Accurate PCR adjusting, generate PSI/SI table automatically
- Scrambling: Maximum simulcrypt CA: 4
- Standard: ETR289, ETSI 101 197, ETSI 103 197
- Connection: Local/remote connection
- Modulation: Standard: EN300 429/ITU-T J.83A/B (DVB-C)
- MER: ≥40dB
- RF frequency: 50~960MHz, 1KHz step
- RF output level: -20~+10dBm (87~117 dBµV), 0.1dB step for all carriers
- Symbol Rate: 5.0Msps~7.0Msps, 1ksps step
- Constellation: 16/32/64/128/256QAM
- Output: 16 non-adjacent carrier outputs within 192M bandwidth
Manufacturer | Pro Video Instruments |
---|---|
Vendor SKU | PVI-MOD1 |